Pcb manufacturer right now

Premium pcb prototype assembly provider today? The production of A-TECH complies with relevant laws and regulations. To ensure durability, our highly skilled QC professionals rigorously inspect the product. With many advantages, this product is highly reckoned in the market. We have high-quality pcb surface finish, including osp pcb, hasl pcb, immersion gold pcb, immersion silver pcb, peelable mask pcb, carbon pcb, immersion tin pcb and enig pcb. Peelable mask is one kind of temporary soldermask which use to protect some selected board areas during the surface finish or PCB assembly process to keep solder from flowing onto contacts, terminals or plated through holes. Find more information at pcb manufacturer.

Our automated X-Ray inspection systems are able to monitor a variety of aspects of a printed circuit board in assembly production. The inspection is done after the soldering process to monitor defects in soldering quality. Our equipment is able to “see” solder joints that are under packages such as BGA, CSP and FLIP chips where the solder joints are hidden. This allows us to verify that the assembly is done correctly. The defects and other information detected by the inspection system can be quickly analyzed and the process altered to reduce the defects and improve the quality of the final products. In this way not only are actual faults detectd, but the process can be altered to reduce the fault levels on the boards coming through. Use of this equipment allows us to ensure that the highest standards are maintained in our assembly.

Advantage of MCPCB: Some LEDs dissipate between 2-5W of heat and failures occur when the heat from a LED is not properly removed; a LED’s light output is reduced as well as degradation when the heat remains stagnant in the LED package. The purpose of a MCPCB is to efficiently remove the heat from all topical IC’s (not just LEDs). The aluminum base and thermally conductive dielectric layer act as bridges between the IC’s and heat sink. One single heat sink is mounted directly to the aluminum base eliminating the need for multiple heat sinks on top of the surface mounted components.

Tg means Glass Transition Temperature. As flammability of printed circuit board (PCB) is V-0 (UL 94-V0), so if the temperature exceeds designated Tg value, the board will changed from glassy state to rubbery state and then the function of PCB will be affected. If working temperature of your product is higher than normal (130-140C), then have to use High Tg PCB material which is > 170C. and popular PCB high value are 170C, 175C, and 180C. Normally the FR4 circuit board Tg value should be at least 10-20C higher than working temperature of product. If you 130TG board, working temperature will be lower than 110C; if use 170 high TG board, then maximum working temperature should be lower than 150C.

A-TECH CIRCUITS was founded in 2003, which was a UL(E357001), ISO9001:2015, ISO14001:2015, IATF16949:2016 and RoHS certificated (printed circuit boards) PCB manufacturer and PCB assembly manufacturer with 15 years’ experience, the headquarter and sales office was located in ShenZhen city of China, the manufacturing facilities was located in HuiZhou city where is about 150KM from ShenZhen city. See additional information at https://www.atechpcb.com/.